Teac CR-H260i Owner's Manual page 15

A
Analog audio input/output jacks
[AUX1/AUX2]
Use to input/output analog audio signals.
Connect this unit's input and output jacks to the output
and input jacks of other devices using commercially
available audio cables.
p Connect an audio cable's white pin plug to the
white (L) jack and connect its red pin plug to the red
(R) jack.
White (L)
Red (R)
p Be sure to insert each plug securely. To prevent
humming and interference, avoid bundling the sig-
nal interconnection cables together with the AC
power cord or speaker cables.
CR-H260i_OM_EFS_vA_CS6.indb 15
B
Bluetooth antenna (Bluetooth)
This is used for communication with other Bluetooth
devices.
C
Power cord
After all connections are complete, connect the power
cord's plug to the AC wall socket.
p If you do not expect to use this unit for a long
White (L)
period of time, unplug the power cord from the
Red (R)
wall outlet.
V CAUTION
p Be sure to connect the power cord to an AC outlet
that supplies the correct voltage.
p Hold the power plug when plugging it into an out-
let or unplugging it. Never pull or yank on the
power cord.
15
12/10/11 12:02