Basic Operation - Teac CR-H260i Owner's Manual

Names and functions of parts (RC) (2)
s
REPEAT 1/ALL button
In CD/USB/SD/iPod mode, use this button to set the
repeat playback mode (page 37).
t
DISPLAY button
In CD/USB/SD mode, use this button to change the
information shown on the display during playback.
u
TIME MODE button
Use this button with the Scroll buttons (k/j) to set
the timer (page 46).
v
Scroll buttons [k/j]
In CD/USB/SD mode, use these buttons to select a
folder (MP3/WMA only).
When in TUNER mode, use these to change the fre-
quency received.
Press and hold for at least one second to start auto-
matic station tuning.
When setting the clock or the timer, use these to
change the time or number of minutes.
After pressing the TONE/BAL button, use these but-
tons to adjust bass, treble and balance.
w
MUTE button
Use this button to temporarily mute the sound
(page 24).
x
VOLUME buttons [+/−]
Use these buttons to adjust the volume. The "+" button
increases and the "−" button decreases the volume.
22
CR-H260i_OM_EFS_vA_CS6.indb 22

Basic operation (1)

1 2
1
Press the STANDBY/ON button to turn the
unit on.
Standby indicator
The standby indicator lights orange when in standby
and turns off when the unit is on.
2
Press the SOURCE button repeatedly to
cycle through the source options.
Each time you press the SOURCE button, the source
setting changes as follows:
TUNER FM TUNER AM
Bluetooth AUX2 IN
3
CD USB
AUX1 IN SD CARD
12/10/11 12:02