Installing An Hfi Carrier Card For Host Fabric Interface (Hfi) Support As Needed (Available When An F Model Cpu Is Used) - Supermicro X11DPH-Tq User Manual

Installing an HFI Carrier Card for Host Fabric Interface (HFI)
Support as Needed (Available when an F Model CPU is Used)
Note: A host fabric interface carrier card header (JHFI1) is located on the motherboard.
Install an HFI card on an appropriate PCI-E slot of your choice on the motherboard
and an F model CPU on CPU Socket#1 to use this feature. (For more information on
the JHFI1 header, please refer to page 55.)
Installation Instructions
1. Locate CPU Socket 1 on the motherboard. Install an F model CPU on this socket as
shown below (marked 1) if you have not done so.
2. Locate the PCI-E slots the motherboard. Install an Host Fabric Interface (HFI) card on
an appropriate PCI-E slot of your choice as shown below (marked 2).
3. Connect the HFI connector on the HFI cable to the onboard JHFI1 header as show
below (marked 3 below.)
4. Connect the other end of the HFI cable to the connector (marked
shown below. (Marked 4 below.)
5. Connect the plug (marked 5) on one end of the Internal_Faceplate_to_the_Processor
(IFP) cable to the connector (marked
6. Connect the other end of IFP cable (marked 6) to the F model CPU installed in CPU
Socket 1 as shown below.
IFP Cable (Optional)
HFI Carrier
Card
4. Connect another end of
4
the HFI cable to the
connector (A)
of the HFI card.
HFI (Host Fabric
Interface) Sideband
Cable
) on the HFI card as shown below.
B
6. Connect the other end of
6
the IFP cable to the
F model CPU.
5
5. Connect one end of
the IFP cable to the
connector (B)
A
of the HFI card.
2. Install an HFI card to a PCI-E slot
B
2
3. Connect the HFI connector
on the HFI cable to the
3
onboard JHFI1 header.
35
F Model
Processor
JPG1
BMC
JSDCARD1
AST2500
LAN
CTRL
JPME2
Battery
BT1
MH4
X11DPH-i
REV: 1.01
JHFI1 MH11
JHFI1 Header
JHFI1
LE3
LE4
(for CPU1)
BIOS
JBT1
Intel
PCH
JRK1
SATA2 SATA1
JL1
FANB FANA FAN4 FAN3
Chapter 2: Installation
) on the HFI card as
A
Install an F model CPU
1
on CPU Socket#1
USB 2/3(3.0)
COM1
VGA
FAN5
LAN2 LAN1
IPMI_LAN
FAN6
USB 0/1(3.0)
CPU2
MAC CODE
BIOS LICENSE
BAR CODE
JF1
CPU1
CPU1