Power Button; Reset Button - Supermicro X11DPH-Tq User Manual

Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual

Power Button

The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power when the system
is in suspend mode, press the button for 4 seconds or longer. Refer to the table below for
pin definitions.

Reset Button

The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
JPG1
BMC
JSDCARD1
AST2500
LAN
CTRL
JPME2
Battery
BT1
MH4
X11DPH-i
REV: 1.01
MH11
JHFI1
LE3
LE4
BIOS
JBT1
Intel
PCH
JRK1
SATA2 SATA1
JL1
FANB FANA FAN4 FAN3
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
USB 2/3(3.0)
VGA
FAN5
LAN2 LAN1
IPMI_LAN
FAN6
USB 0/1(3.0)
CPU2
MAC CODE
BIOS LICENSE
BAR CODE
CPU1
1. PWR Button
COM1
2. Reset Button
1
PWR
Power Button
2
Reset
Reset Button
3.3V
UID LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V
JF1
NMI
48
1 2
Ground
Ground
Power Fail LED
OH/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
HDD LED
PWR LED
Ground
19 20