Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11DPH-Tq User Manual

Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.

Tools Needed

JPG1
BMC
AST2500
JPME2
LE3
LE4
BIOS
PCH
JRK1
SATA2 SATA1
JL1
FANB FANA

Location of Mounting Holes

Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Screws (9)
JSDCARD1
LAN
CTRL
Battery
BT1
MH4
X11DPH-i
REV: 1.01
MH11
MAC CODE
JHFI1
BAR CODE
JBT1
Intel
FAN4 FAN3
Standoffs (9) as Needed
USB 2/3(3.0)
VGA
FAN5
LAN2 LAN1
FAN6
CPU2
BIOS LICENSE
CPU1
24
COM1
IPMI_LAN
USB 0/1(3.0)
JF1