Quest Commands - Pioneer PDP 427CMX Technical Manual

5.5.6 QUEST Commands

What are QUEST commands?
• Quest commands output TXD such as adjustment data from the panel's microprocessor to a PC.
• Adjustment and other data is output in ASCII code.
Note Command names are given inside brackets < >.
• Data output format
Command
STX (02hex)
(3 Byte)
Note
• A QUEST command is invalid when no ID has not been assigned.
• A QUEST command is invalid when a wildcard (*) is used in the ID when sending the command.
7 Quest Command Table
Command Command
Command
434CMX 427CMX
425CMX
505CMX 507CMX
+
GST QST
+
GPI QPI
+
GWB QWB
+
GPS QPS
+
GSS QSS
+
GSO QSO
+
– QAP
+
– QCI
+
– QSU
Data ····
Function
Obtains status information.
Obtains integrator/PICTURE information.
Obtains integrator/WHITE BALANCE information.
Obtains integrator/SCREEN information.
Obtains SETUP information.
Obtains Menu Integrator/OPTION information.
Obtains audio status.
Obtains time information.
Obtains various machine names.
RS-232C Adjustment
Checksum
Data
ETX (03hex)
(2 Byte)
Number direct
Effective Minimum Maximum
Last
Comment
memory
275