Advertisement
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
ATTUATORE OLEODINAMICO PER CANCELLI A BATTENTE
HYDRAULIC OPERATOR FOR SWING GATE
ACTUATEUR HYDRAULIQUE POUR PORTAIL À BATTANTS
ACTUADOR OLEODINAMICO PARA CANCELAS ABATIBLES
67411170
®
HALF TANK
MINI TANK
MANUALE D`INSTALLAZIONE
ed informazioni sulla sicurezza
INSTALLATION MANUAL
and Security Information
REV 06 - 03/2015
Italiano
Italiano
English
English
Fran ais
Français
Espanol
Espanol
Advertisement
Table of Contents
Related Manuals for SEA HALF TANK
Summary of Contents for SEA HALF TANK
- Page 1 Espanol Espanol ATTUATORE OLEODINAMICO PER CANCELLI A BATTENTE HYDRAULIC OPERATOR FOR SWING GATE ACTUATEUR HYDRAULIQUE POUR PORTAIL À BATTANTS ACTUADOR OLEODINAMICO PARA CANCELAS ABATIBLES HALF TANK MINI TANK MANUALE D`INSTALLAZIONE ed informazioni sulla sicurezza INSTALLATION MANUAL and Security Information 67411170...
-
Page 2: Features And Specifications
Hydraulic locking is guaranteed on gates with length up to 1.80 m with the Half Tank 270 and Mini Tank operators while for lengths up to 2.20 m use the Half Tank 390. An electric lock should be used for leaves (in all versions) exceeding those lengths. - Page 3 Apertura Porte e Cancelli International registered trademark n. 804888 TECHNICAL FEATURES HALF TANK 270 (230V) HALF TANK 390 (230V) HALF TANK 270 (120V) HALF TANK 390 (120V) Power supply 230 V (±5%) 50/60 Hz 120 V (±5%) 50/60 Hz...
- Page 4 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli HALF TANK International registered trademark n. 804888 MINI TANK Fig. 4 67411170 REV 06 - 03/2015...
-
Page 5: Standard Installation
® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 STANDARD INSTALLATION EXIT 1) Operator ENTRY 2) Mechanical stop 3) Electronic control unit 4) Flashing lamp Fig. 5 5) Photocell Dx... - Page 6 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 INSIDE OPENING INSTALLATION HALF TANK 270 Total stroke 270 mm - max suggested stroke 250 mm Outside Max stroke Stroke...
-
Page 7: Installation On Masonry Pillars, Making A Niche
90° 90° INSTALLATION ON MASONRY PILLARS, MAKING A NICHE 60 Min. * 1250 * Half Tank 270 - Mini Tank Version 155 Min. **1500 ** Half Tank 390 Version If you have to make a niche observe the dimensions shown in fig.10. - Page 8 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 OSCILLATING FORK INSTALLATION PRELIMINARY -Open the package carefully, paying attention to not lose the parts reported in fig.4 -Fix the oscillating fork as in fig.11.
- Page 9 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 POSITIONING OF THE FRONT FIXATION Once the operator has been mounted on the back fixation close the leaf and do as follows: 1) Release the operator (as in Fig.
- Page 10 Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 INSTALLATION OF THE HALF TANK 270-390 MECHANICAL LIMIT SWITCH STOPS (Accessories on request) 1) Release the unit (as in Fig. 36) 2) Let the rod come out about 3/4 of its run 3) Put the limit switch stops on the front flange of the unit with the two rods (of the three which are present on the stop) which are in parallel to the gate (Fig.
- Page 11 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 INSTALLATION OF THE MINI TANK MECHANICAL LIMIT SWITCH STOPS (Accessories on request) - Release the unit (as in Fig. 36).
-
Page 12: Installation Of The Chromium-Plated Rod Protection
® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 INSTALLATION OF THE CHROMIUM-PLATED ROD PROTECTION Make sure to have inserted the antivibration plastic frame (A) before inserting the rod cover extrusion (Fig. 26). - Page 13 ® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 PLASTIC RELEASE MOUNTING ATTENTION: the mounting of the plastic release must be effectuated as shown in fig. 30 only and...
-
Page 14: Oil Level Measurement
® HALF TANK - MINI TANK English English Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 OIL LEVEL MEASUREMENT Insertion into the motor (cm) Fig. 35 ACCESSORIES KEY SWITCH TRANSMITTER PHOTOCELLS SAFETY GATE RADIO RECEIVER EXTERNAL... -
Page 15: Periodical Maintenance
10) Check the functionality of all the accessories especially the function of all security devices and Annual of the Safety Gate. Annual Lubricate the rod (see page 19) with SEA grease (GREASE GL 00 Cod.65000009) Annual 12) After having executed the periodical maintenance it is neccessary to repeat the test and to reactivate the automation. -
Page 16: Risk Examination
Remember to separate mains (230/120V) carrying cables from low voltage control cables. INTENDED USE The Half Tank and Mini Tank in all their versions have been planned to be used exclusively for the automation of swing gates SPARE PARTS To obtain spare parts contact: SEA S.p.A. - Page 17 5) DELIVERY Delivery shall take place, approximately and not peremptorily, within 30 working days from the date of receipt of the order, unless otherwise notified. Transport of the goods sold shall be at Buyer’s cost and risk. SEA shall not bear the costs of delivery giving the goods to the carrier, as chosen either by SEA or by the Buyer. Any loss and/or damage of the goods during transport, are at Buyer’s cost.
- Page 18 14. Transit through the leaves is allowed only when the gate is fully open. 15. The User must not attempt to repair or to take direct action on the system and must solely contact qualified SEA personnel or SEA service centers. User can apply only the manual function of emergency.
- Page 19 3. Este producto fue diseñado y construido exclusivamente para el uso especificado en esta documentación. Cualquier otro uso no expresamente indicado puede afectar la integridad del producto y ser una fuente de peligro. El uso inadecuado es también causa de anulación de la garantía. SEA S.p.A. se exime de toda responsabilidad causadas por uso inapropiado o diferente de aquel para el que el sistema automatizado fue producido.
- Page 20 International registered trademark n. 804888 Dichiarazione di conformità Declaration of Conformity La SEA S.p.A. dichiara che, con l’installazione degli adeguati dispositivi di sicurezza e di filtraggio disturbi, i prodotti: SEA S.p.A. declares that by installing the appropriate safety equipment and noise filtering the...
- Page 21 è stato testato singolarmente al fine di garantire i più alti livelli qualitativi e la vostra soddisfazione. Vi ringraziamo per aver scelto SEA. This item has been produced following strict production procedures and has been singularly tested for the highest quality levels and for your complete satisfaction.
- Page 23 N.B: L’estensione della garanzia legale di 12 mesi a 24 mesi e 36 mesi è va- lida solo se il presente modulo viene rispedito per posta o fax a SEA S.p.A. entro 15gg dalla data di acquisto. Allegare relativa fattura d’acquisto.
- Page 24 ® Sistemi Elettronici di Apertura Porte e Cancelli International registered trademark n. 804888 SEA S.p.A. Zona Ind. S.Atto 64020 TERAMO Italy Tel. +39.0861.588341 - Fax+39.0861.588344 e-mail: seacom@seateam.com WEB SITE : www.seateam.com...
Need help?
Do you have a question about the HALF TANK and is the answer not in the manual?
Questions and answers