Garmin GIA 63 Installation Manual page 20

Characteristic
Superflag Power
Requirements for P605
(Main 2 Connector)
Power Requirements
for P605
(Main 2 Connector)
Only 011-01105-20 and 011-01105-30 units support both 14 Vdc and 28 Vdc COMs. All
*
other units
only support 28 Vdc COMs.
1.4.11 Power Interrupt
Unit Name Unit Part Number
GIA 63
GIA 63W
GIA 63H
*Refer to Mod Status Table in front of manual for applicable mod levels.
**Refer to Section 3.8 for Continued Airworthiness. The DO-160 revision used for qualification of each unit is
specified in the applicable environmental qualification form.
GIA 63 Installation Manual
Page 1-10
Table 1-9. GIA 63(X) Power Specifications
Power depends upon loads present on Superflag output pins
(see Sections 4.7.2.1 and 4.10.7)
1.0 A max @ 27.5 Vdc (Without Superflags Active)
2.0 A max @ 13.75 Vdc (Without Superflags Active)
Table 1-10. GIA 63(X) Power Interrupt
Mod Status*
011-00781-00
0, 1, 2, 3
011-00781-01
011-01105-00
011-01105-01
011-01105-20
011-01105-40
011-01105-30
Specification
Long Term Power Interrupt
Category Per RTCA DO-160**
4
1
0
1
0
0
0
0
0
A (200mS)
B (50mS)
A (200mS)
B (50mS)
A (200mS)
B (50mS)
A (200mS)
A (200mS)
A (200mS)
A (200mS)
190-00303-05
Rev. Y