Garmin GIA 63 Installation Manual page 114

4.7.2.5 OBS
Pin Name
VOR OBS ROTOR C
VOR OBS ROTOR H (GROUND)
VOR OBS STATOR E (VOR/LOC COMMON)
VOR OBS STATOR E (NAV COMMON)
(011-01105-2X/-3X/-4X ONLY)
VOR OBS STATOR F
VOR OBS STATOR D
VOR OBS STATOR G (VOR/LOC COMMON)
VOR OBS STATOR G (NAV COMMON)
(011-01105-2X/-3X/-4X ONLY)
VOR OBS ROTOR C and H are a buffered 500 Hz output that is intended to drive the OBS rotors. VOR
OBS STATOR D and VOR OBS STATOR F are each phase and amplitude shifted version of the VOR
ROTOR C output. Each pair is intended to read one of the two windings of the indicator's OBS stator.
4.7.2.6 VOR/LOC Composite
Pin Name
VOR/LOC COMPOSITE OUT
With a Standard VOR Test Signal applied, VOR/LOC COMPOSITE OUT is 0.5 ±0.1 VRMS into a 10 kΩ
load. With a standard localizer centering test signal applied, VOR/LOC COMPOSITE OUT is 0.350 ±0.05
VRMS into a 10 kΩ load.
4.7.2.7 Glideslope Composite
Pin Name
GLIDESLOPE COMPOSITE OUT
(011-01105-2X/-3X/-4X ONLY)
With a standard glideslope centering test signal applied, GLIDESLOPE COMPOSITE OUT is
0.35 +/- 0.05 Vrms into a 10k Ω load.
GIA 63 Installation Manual
Page 4-30
Table 4-27. OBS
Table 4-28. VOR/LOC Composite
Table 4-29. Glideslope Composite
Connector Pin
P602 9
P602 10
P602 11
P602 12
P602 13
P602
14
Connector Pin
P602 8
Connector Pin
P602 58
190-00303-05
I/O
Out
--
Out
In
In
Out
I/O
Out
I/O
Out
Rev. Y