Table of Contents
Advertisement
Basic Scanning Operation
Before the scanner can begin to scan, you must have created
scannable objects. Your scanner will scan any scannable objects that
are members of enabled Scan Lists and are not locked out.
1. Press SCAN to start scanning.
Flashing T indicates scanner is
receiving control channel data
from a trunked radio system
Scan lists 1 to 10
Scan lists 11 to 20
2. Press PAUSE to pause scanner on an active object in scan mode.
Press SCAN or PAUSE to resume scan.
Wildcard Scanning
A Wildcard TGRP object allows you to receive all radio traffic on
a trunked radio system. It works by catching talkgroup calls on the
system that are not already stored as objects in the radio's memory.
In order for the Wildcard TGRP to function properly, the radio needs
to be in SCAN Mode. This is what enables the scanner to find the
previously stored TGRP objects that need to be checked before
declaring that the found talkgroup is new and should be scanned as
a Wildcard "hit."
If you park on a Wildcard TGRP object in Manual Mode, the scanner
is not able to "see" the previously stored TGRP objects, and every
call on the trunked radio system will come up as a wildcard hit.
Scanning
>>
................
1
Pri
.....................
35
<<
Scanning
Hide quick links:
Advertisement
Table of Contents
