From Global Settings Menu; Ns (Not Scanned) Scan List - Radio Shack PRO-652 User Manual

Organizing Objects
Scan List 11-20
Press FUNC, then press a number key, i.e., press FUNC 3 to toggle
the status of Scan List 13.
Note: If you enable a Scan List that has no assigned objects, the
number for that Scan List will flash in the display while the scanner is
scanning.

From Global Settings Menu

1. Press PROG to enter Program Mode.
2. Press
GLOB
3. Press p or q to scroll to
4. Press p or q to scroll to the Scan List you wish to change then
press SEL.
5. Press u to scroll to
Off.
The asterisk (*) indicates Scan List enabled.
6. Press the
Save
7. Press
Save
GLOB menu.

NS (Not Scanned) Scan List

If you accidently store an object with no Scan List mappings, the
object will be placed in a special "NS" Scan List.
To access NS scan List:
1. Press PROG to enter Program Mode or press MAN to enter
Manual Mode.
2. Press t or u to scroll to the NS Scan List.
3. Press p or q to scroll through the NS objects.
softkey.
Scan Lists:
and press t or u to select On or
Enabled:
softkey to save settings.
softkey again to confirm global changes and exit
42
and press SEL.