Setting The Default Scan List; Deleting Objects - Radio Shack PRO-652 User Manual

Organizing Objects

Setting the Default Scan List

By default, your scanner will store all new objects, and objects found
during Search, Tune, and Stalker as mapped to Scan List 01.
You can easily change the default Scan List to any Scan List you
specify, including the special FAV and Skywarn Scan Lists.
1. Press PROG.
2. Press
GLOB
3. Press q to scroll down to
4. Enter new Scan List number to use as default scan list.
The "not scanned" (ns) Scan List. Objects with no Scan List
0:
mapping.
- Normal Scan Lists
1 20:
FAV Scan List
21:
Skywarn Scan List.
22:
5. Press ENT or the
List value.
6. Press
SAVE

Deleting Objects

To delete an object:
1. Press PROG to enter Program Mode.
2. Press p, q, t or u to navigate to the object you wish to delete.
3. Press FUNC CLR to delete the object.
The scanner will ask you to confirm the delete command before
removing the object from the scanner's memory. Deletions
cannot be un-done.
softkey.
Dflt
softkey to store your new default Scan
Done
softkey to save your changes.
44
ScanList.