Creating A Conv Object; Changing Text Tags - Radio Shack PRO-652 User Manual

Note: When MODE is set for Auto, the scanner will automatically
select the default mode based on the frequency you enter. In most
cases it will not be necessary to change MODE.
We also recommend labeling your CONV object by giving it a name
in the TAG field. This makes it easier to find the CONV object later
and identifies it when the scanner stops to monitor activity.

Creating a CONV Object

1. Press PROG to put scanner in Program Mode.
2. Press softkey to create new object.
NEW
3. Press softkey to enter a conventional channel object.
CONV
4. Press q to scroll through the conventional channel object
parameters until the flashing cursor appears next to the
label.
5. Use the number keys and • to enter the frequency, including the
decimal point.
6. Press ENT or the
in your conventional object.
Note: Go to www.radioreference.com for up-to-date frequency
information.

Changing Text Tags

By default, your new conventional object will be tagged "Channel."
We recommend that you rename your CONV object, making it easier
to find it later, and identifying it when the scanner stops to monitor
activity.
To change the tag:
1. Press q until the cursor highlights
2. Press SEL to edit the tag.
3. Enter the text using the text keys (up to 16 characters).
Creating Scannable Objects
softkey to store the frequency parameter
DONE
Tag:.
29
Freq: