Radio Shack PRO-652 User Manual page 102

Detailed Menu Reference
CONV
Parameter
LED Mode
LED Color
Latch LED
Backlight
Alarm
Fav
Skywarn
EXPERT BELOW
Modulation
Options
Solid or Flash Controls whether the Alert LED flashes
or remains on solid when the Alert LED is
used.
0-7 Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
On or Off Normally the Alert LED is active only while
the object is receiving a transmission. When
Latch is on, the Alert LED will remain lit
after the transmission is complete, unless
overridden by a subsequent object that is
also using the Alert LED.
On, Off or Flash Controls whether the backlight should be
on or flashing while the object is active.
"Off" setting is ignored by the PRO-652.
None, Sets the Audible Alarm for the CONV
object. When an Audible Alarm is selected,
Chirp,
the selected alarm will play at the begin-
Hi-Lo,
ning of each transmission on the CONV
Alert,
object, or anytime the scanner stops for
Ring, 2-Chirp,
activity on the CONV object while scanning.
Fast Hi-Lo,
DTMF#
Yes or No When On, the CONV object is a member of
the Favorites Scan List.
Yes or No When On, the CONV object is a member of
the Skywarn Scan List.
Auto, AM, Modulation setting for the CONV channel.
In most cases Auto will work fine. Use AM
FM,
to override and force AM modulation, FM
NFM
to force FM modulation, NFM to force
narrow FM modulation.
102
Description
P
Atten
Delay
Delay
Digit
Supe
Audi
Hit C