Power-On Password - Radio Shack PRO-652 User Manual

Power-On Password

Setting a power-on password can prevent anyone other than you
from using this scanner.
tion
To set the power-on password
r
1. Press PROG to enter Program Mode.
2. Press
3. Scroll to
n
ked
4. The confirmation menu for the power-on password setting
he
appears. Press
eing
5. Enter the four-character (four-digit) password. You can enter the
characters using alphanumeric text entry method. When you
have finished entering characters, press
entry.
Note: You can cancel the entry by pressing
To operate your scanner with power-on password:
1. Turn VOLUME clockwise to turn power on.
2. After the Welcome message is displayed, the scanner prompts
you to enter the password.
l
3. Enter your password.
4. If you entered the correct password, you will be able to operate
your scanner. If you have entered the wrong password, the
scanner will generate error beep. Try entering your password
again.
sion
To disable the power-on password
1. Press PROG to enter Program Mode.
2. Press
3. Scroll to
softkey.
GLOB
Set password,
softkey.
YES
softkey.
GLOB
Set password,
Additional Information
then press SEL key.
softkey to save the
OK
Cancl
then press SEL key.
81
softkey.