Service And Maintenance - Siemens SINAMICS PM240-2 Hardware Installation Manual

Service and maintenance

Risk of fire or electric shock as a result of defective components
If an overcurrent protection device responds, this can indicate that a fault current was
interrupted.
Check the circuit components and all of the components of the inverter and replace
defective parts and components to reduce the risk of a fire or an electric shock.
You must replace the complete overload relay if the current carrying element of the relay
has burnt through.
Repair
Danger due to incorrect repair
Repairs may only be carried out by Siemens Service, by repair centers authorized by
Siemens or by authorized personnel who are thoroughly acquainted with all the warnings
and operating procedures contained in this manual.
• Only use original spare parts when carrying out repairs.
Power Module PM240-2
Hardware Installation Manual, 01/2017, A5E33294624B AE
WARNING
WARNING
6
59