Siemens SINAMICS PM240-2 Hardware Installation Manual page 34

Installing/mounting
4.4 Mounting the Power Modules
Depth with Control Unit and Operator Panel (mm)
FSA ... FSC
•
•
•
FSD ... FSF
•
•
•
Table 4- 2
Frame
size
FSA
FSB
FSC
FSD
FSE
FSF
The Power Modules are designed for mounting without any lateral cooling air clearance. For toler-
1)
ance reasons, we recommend a lateral clearance of approx. 1 mm.
34
With Control Unit:
With Control Unit and blanking cover / BOP-2:
With Control Unit and IOP:
With Control Unit:
With Control Unit and blanking cover / BOP-2:
With Control Unit and IOP:
Drilling dimensions, cooling air clearances [mm] and fixing [Nm]
Drilling dimensions
h b
186 62.3
281 80
343 120
430 170
509 230
680 270
CU230P-2
Cooling air clearances
c Top Bottom
6 80 100
6 80 100
6 80 100
7 300 350
8.5 300 350
13 300 350
Hardware Installation Manual, 01/2017, A5E33294624B AE
CU240B/E-2
+ 59 + 41
+ 70 + 52
+ 81 + 63
+ 15.5 + 0
+ 26.5 + 8.5
+ 37.5 + 19.5
Fixing/torque
1)
Front
100 3 x M4 / 2.5
100 4 x M4 / 2.5
100 4 x M5 / 3.5
100 4 x M5 / 6.0
100 4 x M6 / 10
100 4 x M8 / 25
Power Module PM240-2
CU250S-2
+ 62
+ 73
+ 84
+ 18.5
+ 29.5
+ 40.5