Data Input Configuration Screen - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide
Next you must define the pulse-counting interval, which applies to all channels that are
configured for pulse-counting. Highlight one of the remaining channels on the screen and select
the CONFIGURE button (or simply double-click on the selected channel). The following screen
will appear.

Data Input Configuration Screen

Select the Input Definition tab. Here you can match the time interval to that which was
programmed into the CNI2. This will apply to all pulse-counting channels. You can also change
the description of each channel and select which type of data to save. Contact a Product
Service Specialist if you need additional help with other selections on this screen.
129