Otaa Programming Number; Cdma Cellular Configuration Screen - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide
be forwarded at no additional charge. The preferred roaming list says that it is acceptable to
connect with these carriers. However at some point your service provider may install new
equipment in these areas and the contract with the partner may be terminated. In this new
situation roaming fees will be added to each call if the radio is allowed to connect to the other
carriers. This is why it is important to periodically update the PRL.
For service providers that do not support "over-the-air-activation" the radios must be
preprogrammed at our factory prior to shipment.
Go to the Cellular Settings screen and select "CDMA" as the Service Type.

CDMA Cellular Configuration Screen

OTAA Programming Number

In some cases after purchasing CDMA service the radio must dial a special phone number to be
activated and to have account information downloaded into the phone's memory. This phone
number is specific to the carrier and must be entered into the "OTAA Programming Number".
For instance for Verizon the number is usually *228,,,,,1; (*228 followed by five (5) commas,
then a "1" followed by a semicolon).
NOTE
If your CDMA service provider does not support OTAA programming then leave this
field blank.
85