Power Input Connector Polarities; Boost Capacitor - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide

Boost Capacitor

Connects to the TB1 terminal block and assists the battery pack during peak current events,
usually during radio transmission.
Low-Voltage Detector
Measured at the TB1, J1 and J2 power connectors, which ever has the highest voltage. A user-
selectable alarm point in the range of 0.1 – 28 Vdc can be used to report low-voltage situations.
Power Input #3 (TB1) Connector Type
Screw terminal, 5.08 mm (0.2") spacing. 90º entry. 14-26 AWG (0.14 – 1.5 mm) wire size.
Maximum torque is 0.6 Nm (5.3 lbs.-in). See next illustration for polarity.
Power Input #1 & #2 (J1 and J2) Connector Type
3-pin JST B3B-XH-A. Recommended mating connector is JST XHP-3 connector housing with
two SXH-001T-P0.6 female contacts. See next illustration for polarity.

Power Input Connector Polarities

154