Defining A Call Profile Name - Honeywell CNI2 Operating And Installation Manual

CNI2 Operating and Installation Guide
On the next screen select the "Add" button and enter in a text name for the profile.

Defining a Call Profile Name

On the final screen you can define the rate at which the devices should call in. In the following
figure, the CNI2 will call in at regular 8-hour intervals starting at 14:00:00. This is a Periodic
schedule. The CNI2 must make at least one call into the system in order to obtain the first call
schedule. Thereafter each time the unit calls in DC-2009 will instruct the CNI2 to call again in 8
hours.
NOTE:
An aggressive call schedule will reduce battery life of CNI2 products that run entirely on battery
power.
You can also use the Non-Periodic Call mode to define unusual call profiles. For instance you
may want the CNI2 to call in at 8:00 and 12:00 each day. A Mercury Product Support Specialist
can provide assistance in defining these special profiles.
Select the Apply button to make the changes permanent.
122