Lenovo ThinkStation P510 Hardware Maintenance Manual page 149

4. If you are replacing a storage drive with a converter, flex the sides of the bracket to remove the converter
from the bracket.
Figure 88. Removing the converter from the type
Remove the storage drive from the converter. See Figure 80 "Removing the metal bracket from the
plastic frame of the converter" on page 139.
5. Install the new storage drive into the converter. See Figure 82 "Installing the storage drive into the metal
bracket of the converter" on page 140.
6. Flex the sides of the bracket and align pins
converter.
Note: Ensure that the circuit board face upward and the connectors
bracket.
Figure 89. Installing the converter into the type
2
bracket
1 on the bracket with the corresponding holes in the
2
bracket
Chapter 9
2 face toward the rear of the
.
Installing or replacing hardware
143