Further Information; Warranty Information - Axis A1001 Installation Manual

• Verify all the hardware connections. This requires access to the product's webpages. For
more information, see the User Manual.
• Verify that the system, including the connected external devices, functions correctly.
- Swipe a card and test the readers, doors, and locks.
- If the system includes REX devices, sensors or other devices, test them as well.
- If activated, test the tampering alarms.
If the results from any of the steps above indicate faults or unexpected behavior:
- Test the signals of the wires using appropriate equipment and check if the
wires or cables are damaged in any way.
- Replace all damaged or faulty cables and wires.
- Once the cables and wires have been replaced, verify all the hardware
connections again. This requires access to the product's webpages. For more
information, see the User Manual.
• Make sure all access schedules, doors, groups, and users are up to date. This requires
access to the product's webpages. For more information, see the User Manual.
• If the door controller is not behaving as expected, see the User manual for information
about troubleshooting and the product's built-in maintenance functions.
For information about maintenance of the battery, see Requirements for Compliance with UL294
6th Edition 7 and Battery on page 10.

Further information

• For the latest version of this document, see axis.com
• The user manual is available at axis.com
• To check if there is updated firmware available for your product, see axis.com/support
• For useful online trainings and webinars, see axis.com/academy

Warranty information

For information about Axis' product warranty and thereto related information, go to
axis.com/warranty
AXIS A1001 Network Door Controller
45
EN