Replacing the tobii eye-tracker
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
NOTE: After replacing the Tobii eye-tracker module, launch the EyeX
application with internet connection to update the firmware
automatically.
Using the alignment posts, place the tobii eye-tracker module on the display bezel
and snap it into place.
Post-requisites
1
Follow the procedure from step 2 to step 4 in
2
Replace the
3
Follow the procedure from step 2 to step 15 in
4
Replace the
5
Replace the
6
Replace the
7
Replace the
8
Replace the
9
Follow the procedure from step 4 to step 7 in
10 Replace the
display
assembly.
computer
base.
rear-I/O
cover.
memory
modules.
solid-state
drive.
wireless
card.
base
cover.
computer. After working inside your
After working inside your
"Replacing the display
"Replacing the hard
"Replacing the system
computer.
bezel".
board".
drive".
99