Removing The Computer Base; Prerequisites; Procedure - Dell Alienware 17 R4 Service Manual

Removing the computer base

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Follow the procedure from step 1 to step 4 in
3 Remove the
4 Remove the
5 Remove the

Procedure

1 Note the cable routing and remove the antenna cables from the routing
guides on the computer base.
2 Disconnect the tron-light cable from the system board.
base cover.
wireless card.
solid-state drive.
rear-I/O cover.
computer. After working inside your
After working inside your
"Removing the hard
computer.
drive".
39