Post-Requisites - Dell Alienware 17 R4 Service Manual

9 Insert the keyboard cable, macro-keys backlight cable, and keyboard-
backlight cable into their connectors and press down the latches to secure the
cables.
10 Connect the macro-keys cable, speaker cable, power-adapter port cable, and
coin-cell battery cable to the system board.
11 Route the coin-cell battery through the routing channel and adhere the tape
to secure the cable.
12 Turn the computer over.
13 Connect the logo-board cable, power-button board cable, and tobii eye-
tracker board cable to the system board.
14 Slide the display cable into the connector on the system board and close the
latch to secure the cable.
15 Adhere the tape that secures the display cable to the system board.

Post-requisites

1 Replace the
2 Replace the
3 Replace the
4 Replace the
5 Follow the procedure from step 4 to step 7 in
6 Replace the
64
computer base.
rear-I/O cover.
solid-state drive.
wireless card.
base cover.
"Replacing the hard drive".