Replacing The Power-Button Board; Procedure; Post-Requisites - Dell Alienware 17 R4 Service Manual

Replacing the power-button board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Using the alignment posts, place the power-button board on the palm-rest
assembly.
2 Align the screw holes on the power-button board with the screw holes on the
palm-rest assembly.
3 Replace the two screws (M2x3) that secure the power-button board to the
palm-rest assembly.

Post-requisites

1 Follow the procedure from step 2 to step 15 in
2 Replace the
3 Replace the
4 Replace the
5 Replace the
6 Replace the
7 Follow the procedure from step 4 to step 7 in
8 Replace the
computer base.
rear-I/O cover.
memory modules.
solid-state drive.
wireless card.
base cover.
computer. After working inside your
After working inside your
"Replacing the hard
"Replacing the system
computer.
board".
drive".
75