Removing The Logo Board; Prerequisites; Procedure - Dell Alienware 17 R4 Service Manual

Removing the logo board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Follow the procedure from step 1 to step 4 in
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the
8 Follow the procedure from step 1 to step 21 in
9 Remove the
10 Remove the

Procedure

1 Remove the two screws (M2x3) that secure the logo board to the display
back-cover and antenna assembly.
100
base cover.
wireless card.
solid-state drive.
rear-I/O cover.
computer base.
memory modules.
display assembly.
display bezel.
computer. After working inside your
After working inside your
"Removing the hard
"Removing the system
computer.
drive".
board".