Replacing The Display Assembly; Procedure; Post-Requisites - Dell Alienware 17 R4 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the display hinges with the screw holes on the palm-
rest assembly.
2 Replace the six screws (M2.5x5) that secure the display assembly to the palm-
rest assembly.

Post-requisites

1 Follow the procedure from step 2 to step 15 in
2 Replace the
3 Replace the
4 Replace the
5 Replace the
6 Replace the
7 Follow the procedure from step 4 to step 7 in
8 Replace the
78
computer base.
rear-I/O cover.
memory modules.
solid-state drive.
wireless card.
base cover.
computer. After working inside your
After working inside your
"Replacing the hard
"Replacing the system
computer.
board".
drive".