Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
CAUTION: Ensure that no cables are under the keyboard.
1
Slide the keyboard under the tabs on the palm-rest assembly.
2
Align the screw holes on the keyboard bracket with the screw holes on the
palm-rest assembly.
3
Replace the palm-rest assembly screws (M2x3) that secure the keyboard
bracket to the palm-rest assembly.
Post-requisites
1
Replace the battery.
2
Follow the procedure from step 2 to step 15 in
3
Replace the
4
Replace the
5
Replace the
6
Replace the
7
Replace the
8
Follow the procedure from step 4 to step 7 in
9
Replace the
computer
base.
rear-I/O
cover.
memory
modules.
solid-state
drive.
wireless
card.
base
cover.
computer. After working inside your
After working inside your
"Replacing the hard
"Replacing the system
computer.
board".
drive".
89