Removing The Logo Board; Prerequisites - Dell Alienware 14 Owner's Manual
Notebook pc
Hide thumbs
Also See for Alienware 14:
- Specifications (1 page) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Removing the Logo Board
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. After working inside your computer,
follow the instructions in "After Working Inside Your Computer" on
page 11. For additional safety best practices information, see
the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 12.
2
Remove the battery. See "Removing the Battery" on page 14.
3
Follow the instructions from step 1 to step 3 in "Removing the Secondary Hard-Drive
(optional)" on page 18.
4
Follow the instructions from step 1 to step 6 in "Removing the Palm Rest" on page 32.
5
Remove the display assembly. See "Removing the Display Assembly" on page 67.
6
Remove the display bezel. See "Removing the Display Bezel" on page 71.
7
Remove the display hinges. See "Removing the Display Hinges" on page 73.
8
Remove the display panel. See "Removing the Display Panel" on page 75.
82
|
Removing the Logo Board
Before working inside your computer, read the safety
Hide quick links:
Advertisement
Table of Contents
