Indirect Mount - Emerson FB1200 Instruction Manual

Emerson FB1200 Flow Computer Instruction Manual
D301782X012
July 2017
Figure 2-15: Coplanar Mounting Kit
1 Tubular L-shaped bracket
2 3/8-16 x 1 ½ in wire screw (2) – Apply Killark
Torque screws to 30 in-lbs (3.4 N m)
3 Split 5/16 washer (2)
4 5/16-18 keps nut (2). Apply Loctite 222 Low Strength Purple Threadlocker to nuts.
Torque nuts to 30 in-lbs (3.4 N m)
5 U-bolt bracket
6 2-inch diameter pipe U-bolt
2.7.4

Indirect Mount

You can mount the flow computer to a two-inch pipe or pole. Indirect mount installations use an
inline mounting kit.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
22
®
LUBG-6 Thread Lubricant to threads.
Installation