Manual Setting Of Operating Modes - Bosch FW 200 Installation And Operating Instructions Manual

US/CA
If the default display is showing:
B Simultaneously press and hold
until the following warning message appears:
6
B Continue holding
following message appears:
6
B Press .
All settings have now been reset to their
factory settings with the exception of the date
and time, which remain unchanged.
5.3 Manual setting of operating
modes
The information in the default display (
or 3 on page 2) and the operation always apply
only for one heating zone.
To display the information applicable for the
other heating zone:
B During the default display, use
to the other heating zone.
and
menu
9 12
h
3
24
h
6 720 617 763-15.2O
and until the
menu
9 12
h
3 24
h
6 720 643 256-26.1O
to switch
5.3.1 Selecting the operating mode for heating
15
18
21
15 the modes Comfort
according to the active heating program.
18
21
the room temperature set for Comfort
operating mode.
Fig. 2
the room temperature set for Economy
operating mode.
the room temperature set for Frost
mode.
In normal operation, always leave
the dial in the
using correctly set heating
programs, you can save energy and
enjoy comfort.
Automatic
(factory setting)
Switches automatically between
/ Economy
Constant heating
The controls constantly maintain
Constant economy
The controls constantly maintain
Constant frost protection
The controls constantly maintain
6 720 643 256 (2010/05)
Operation | 27
position. By
/ Frost
operating