Table of Contents
Advertisement
72 | Menu settings INSTALLER SETTINGS (for installers only)
8.4
Configuring the solar thermal
system
The heating system's solar thermal
system has to be configured
manually. The solar heating system
will not be configured as part of
the automatic configuration of the
heating system (
page 66).
Installer settings: Solar system config
A sample system can be found in
section 2.5 on page 12. Other
examples can be found in the
instructions for the ISM or the
planning documents.
Use this menu if you want to configure the solar
heating system, e.g. at start-up or when changing
the system.
Solar system: Select installed solar basic
•
system:
– 1. Standard system: Default system for
solar hot water heating.
– 2. Heating support: Solar hot water
heating with heating boost from a solar
tank.
Solar sys option A 2 collector fields for a
•
second collector array (east/west orientation)
Solar sys option B Reloading system for a
•
solar recharge system (only in conjunction
with 1. Standard system)
Solar sys option C high/low priority for a
•
high/low priority system
Solar sys option D Ext heat exchanger for an
•
external heat exchanger
Solar sys option E Thermal disinfection for
•
thermal disinfection
6 720 643 256 (2010/05)
section 8.2,
For menu structure and adjustment ranges
page 60.
US/CA
Hide quick links:
Advertisement
Table of Contents
