Timer Program For Dhw Recirculation Pump (Systems With Domestic Hot Water Tank Only) - Bosch FW 200 Installation And Operating Instructions Manual

46 | MAIN MENU settings
6.3.4 Timer program for DHW recirculation
pump (systems with domestic hot water
tank only)
The recirculation program specifies when a
connected secondary circulation pump for
domestic hot water runs.
Menu: Domestic hot water > DHW recirc pump
prog
Use this menu if you wish to use a timer program
for the hot water recirculation pump.
The timer program is only programmable and
active if Domestic hot water > DHW and DHW
recirculation pump > Separate programs is set.
Menu: Domestic hot water > DHW recirc pump
prog > Edit > All days
Use this menu to set identical times for every day
for the DHW program.
P1, P2 ... P6: Maximum of six switch points
•
per day and two different operating modes
(On/Off).
– On: Recirculation pump cycles as per
setting ( Section 6.3.5 on page 47). Solid
segments on the display indicate the
period for which the operating mode is
active.
– Off: The recirculation pump is stopped.
Blank segments on the display indicate the
period for which the operating mode is
active.
– The shortest switching interval is 15
minutes (= 1 segment).
– Deactivate switch points that are not
required by deleting them.
For menu structure and adjustment ranges
page 35.
Menu: Domestic hot water > DHW recirc pump
prog > Edit > Mon - Fri
Use this menu to set identical times for the days
Monday to Friday for the DHW program.
6 720 643 256 (2010/05)
P1, P2 ... P6:
•
For explanation see All days above.
For menu structure and adjustment ranges
page 35.
Menu: Domestic hot water > DHW recirc pump
prog > Edit > Sat + Sun
Use this menu to set identical times for Saturday
and Sunday for the DHW program.
P1, P2 ... P6:
•
For explanation see All days above.
For menu structure and adjustment ranges
page 35.
Menu: Domestic hot water > DHW recirc pump
prog > Edit > Monday, Tuesday... Sunday
Use this menu to set different times for individual
days in the DHW program.
P1, P2 ... P6:
•
For explanation see All days above.
For menu structure and adjustment ranges
page 35.
Menu: Domestic hot water > DHW recirc pump
prog > View
B Shows switch points and associated
operating modes for All days, Mon - Fri, Sat +
Sun or the individual day of the week as a
segment pattern.
For menu structure and adjustment ranges
page 35.
US/CA