Bosch FW 200 Installation And Operating Instructions Manual page 13

US/CA
AF Outdoor temperature sensor
CV Flow check valve
DWU1 Valve for return flow boost on the
heating network
DWUC Valve for high/low priority storage
systems (option C)
FB 100 Remote control
FK Solar collector
FW 200 Outdoor reset controls with solar
controls
GZT Boiler
HK Heating zones
1...4
HP Boiler circulator
IPM 2 Module for two heating zones
ISM 2 Solar module for solar water heating
and heating boost
KW Cold water connection
M Mixing valve motor
1...4
MF Supply temperature sensor for mixed
1...4
heating zone
Option A 2nd collector field
Option C High/low priority system
Option E Thermal disinfection of the solar tank
P Heating zone pump
1...4
PA Solar circuit pump (option A)
PE Circulation pump for thermal
disinfection
P/S P/S Piping
(Low-loss header)
RE Flow rate adjuster with indicator
SF Storage tank temperature sensor
(NTC)
SP Solar circuit pump 1st collector field
System 2 Heating boost and solar DHW heating
Information about the appliance | 13
T Collector temperature sensor for 1st
1
collector field
T Buffer storage tank temperature
2
sensor, bottom
T Buffer storage tank temperature
3
sensor, top
T Temperature sensor heating network
4
return for solar heating boost
T Collector temperature sensor
A
(option A) for 2nd collector field
T DHW-side storage tank temperature
C
sensor, bottom
TB Temperature limiter
1...4
TWM Thermostatic DHW mixer
VF System supply temperature sensor
WS DHW storage tank (option C)
C
WS Solar storage tank
S
WW DHW connection
Z Recirculation connection
ZP DHW recirculation pump
1) The FW 200 can optionally be installed
in the boiler or mounted on the wall. If
the FW 200 is installed in the boiler, a
FB 100 in the first heating zone is
possible.
2) Optional
6 720 643 256 (2010/05)