Table of Contents
Advertisement
52 | Viewing information
7
Viewing information
Menu INFO
This menu allows you to view a variety of system
information.
Detailed instructions on navigating through the
menu structure are provided in Section 5.2
starting on page 23.
The menu options are only shown if
the system components are present
and/or active and if no remote
control is accessing these. Some
menu options are not shown
because they are switched off by a
setting for another menu option.
Menu structure INFO
Boiler
Outdoor temperature
Heating mode possible
Current heating supply
temperature
External supply temperature 131.0 °F (55.0 °C)
Burner
Heating pump
Maximum heating supply
temperature
Maximum DHW temperature 140.0 °F (60.0 °C)
Service due
6 720 643 256 (2010/05)
Display (example)
–
50.0 °F (10.0 °C)
Yes | No
131.0 °F (55.0 °C)
On | Off
On | Off
167.0 °F (75.0 °C)
Yes | No
INFO menu overview
The table below provides
an overview of the menu structure (column 1).
•
The menu depth is identified by various
shades of gray.
E.g. the Instruction manual and Boiler menus
are on the same level.
an overview of the various display options
•
(column 2).
descriptions of the individual information
•
items (column 3).
Description
–
Current outdoor temperature
Shows whether boiler is ready for operation.
Current boiler supply temperature.
Supply temperature after the low-loss header.
Burner status.
Status of pump in the boiler.
Maximum supply temperature set on the boiler.
Maximum hot water temperature set on the boiler.
Shows whether a boiler service/inspection is due.
US/CA
Hide quick links:
Advertisement
Table of Contents
