Cleaning Procedure; Cleaning Plastic Surfaces - Datalogic Gryphon GBT4400 Quick Reference Manual

Connecting the Base Station

Cleaning Procedure

Proper cleaning is needed on the external plastic surfaces,
output window and electrical contacts to guarantee reliable
scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt that
may accumulate on the product over time. The maintenance
activity may be repeated more frequently depending on the
severity of the environment in which the scanner is used.
A periodic deeper cleaning is suggested once per month.

Cleaning plastic surfaces

Exterior plastic surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure best
performance during scanning. Use a soft, dry cloth to clean
the product.
If the product is very soiled, clean the plastic surfaces with a
soft cloth moistened with a diluted non-aggressive cleaning
solution or isopropyl alcohol (minimum 70%).
Recommended cleaners for standard plastics are:
Formula 409® glass and surface cleaner, dish soap and water,
Windex® Original (Blue).
Recommended cleaners for Health care plastics:
CaviWipes™ , diluted Clorox® bleach,Hepacide Quat® II,Sani-
Cloth®,Virex® II 256.
Quick Reference Guide 11