Cleaning Procedure
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Contacts on the scanner and base should also be cleaned
as needed to ensure a good connection.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
CAUTION
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom-
mended for use on Datalogic's Disinfectant-Ready Enclo-
sures:
Cleaners
Formula 409® Glass and surface
cleaner
Isopropyl alcohol
Dish soap and water
Windex® Original (Blue)
CAUTION
Quick Reference Guide
Be sure to turn off power and unplug the
device from electrical outlet before cleaning.
Disinfectants may be harsh on metal con-
tacts. They are recommended for use only
on enclosures.
DO NOT spray or pour cleaner directly onto
the unit.
DO NOT use solutions in their concentrated
form.
DO NOT use aerosols, solvents or abrasives.
DO NOT use paper towels or rough cloths to
clean windows.
Cleaning Procedure
Disinfectants
CaviWipes™
Clorox® bleach
Hepacide Quat® II
Sani-Cloth®
Virex® II 256
37