Setting Up The Reader - Datalogic Gryphon GBT4400 Quick Reference Manual

Setting Up the Reader

Setting Up the Reader
Follow the steps below to connect and get your reader up and
communicating with its host.
1. Configure the Base Station starting on this page.
2. Charge the Batteries (see page 14).
3. Link to the Base Station (see page 20).
4. Select the Interface Type (see page 21).
5. Configure the Reader starting on page 33 (optional,
depends on settings needed).
NOTE
2
According to recent modification of Regulation
for shipping Li-Ion based battery packs, the
products and their spare battery packs parts
are shipped with a very low residual charge
(low state of charge).
Hence the needs
* that a new product must be fully recharged
before starting to use it.
and
* that battery packs of the stocked products
GBT/GM44 and spare battery pack parts must
be periodically recharged : for instance by
using a BC40xx cradle powered up with a 12V
Datalogic AC/DC adapter (cod.8-0935) for at
least 30 minutes each 3 months.
Gryphon™ GBT4400