Reading Parameters; Aiming System Control - Datalogic Gryphon GBT4400 Quick Reference Manual

Reading Parameters

Reading Parameters
Point the reader at the target and pull the trigger to enable
the aiming system and the illuminator (red beam) to capture
and decode the image. The aiming system will briefly switch
off during the acquisition time and if no code is decoded will
switch on again before the next acquisition. The illuminator
will remain on until the symbol is decoded.
As you read code symbols, adjust the distance at which you
are holding the reader.

Aiming System Control

A number of options for customizing control of the Aiming
System are available. See the PRG for more information and
programming bar codes.
34 Gryphon™ GBT4400