Datalogic Gryphon GBT4400 Quick Reference Manual page 16

Connecting the Base Station
Host Connection —
cable type is compatible with your host equipment.
NOTE
Most connections plug directly into the host device as shown
in Figure 7. Keyboard Wedge interface cables have a 'Y' con-
nection where its female end mates with the male end of the
cable from the keyboard and the remaining end at the key-
board port on the terminal/PC.
Figure 7. Connecting to the Host
Power Connection —
wall socket with the cable facing downwards (as shown in
Figure 4) to prevent undue strain on the socket.
Disconnecting the Cable —
clip or similar object into the hole on the base, as shown.
Figure 8. Disconnecting the Cable
8
Verify before connection that the reader's
The Gryphon I GBT4400 can be set up to require
a PIN code when connecting to the host. If you
are adding new equipment to a system that
uses a custom security PIN, please see the PRG
for information before proceeding.
or...
or...
or...
Plug the AC Adapter into an approved AC
Paper Clip
To detach the cable, insert a paper
Insert
Gryphon™ GBT4400