Cleaning Procedure; Common Cleaning Solutions - Datalogic PowerScan PD9630-SR Quick Reference Manual

CLEANING PROCEDURE

Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning.
CAUTION: Do not use abrasive pads or cleaning
agents.
CAUTION: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.

Common Cleaning Solutions

The cleaners and disinfectants listed below are recom-
mended for use on Datalogic Disinfectant-Ready Enclo-
sures.
PRODUCT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Hepacide Quat II
Alcohol Wipes
CaviWipes™
Virex® 256
Formula 409® Glass and
Surface Cleaner
Windex® Blue
Clorox® Bleach;
Clorox Healthcare Bleach
Germicidal Cleaner
Hydrogen Peroxide
ProSpray™ Wipes
(Disinfectant towelettes}
100% Gentle dish soap
and water
CHEMICAL CONTENT
Quaternary Ammonium Chloride
solution
Virucidal disinfectant cleaner
70% Isopropyl Alcohol
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl
Ammonium Chloride
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol
lsopropyl Alcohol
Sodium Hypochlorite;
Sodium Hydroxide
3%
0.647% o-phenylphenol;
0.070% o-benzyl-p-chlorophenol
QUICK REFERENCE GUIDE
Cleaning Procedure
23