Cleaning Procedure; Cleaning Plastic Surfaces; Common Cleaning Solutions - Datalogic PowerScan Area Imager Quick Reference Manual

Cleaning Procedure

CLEANING PROCEDURE
Proper cleaning is needed on the external plastic surfaces,
output window and electrical contacts to guarantee reli-
able scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt
that may accumulate on the product over time. The main-
tenance activity may be repeated more frequently
depending on the severity of the environment in which
the scanner is used.
A periodic deeper cleaning is suggested once per month.

Cleaning plastic surfaces

Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Follow the procedures described in this instruction sheet
to keep your PowerScan™ device in good operating condi-
tion.
WARNING: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.
CAUTION: DO NOT use abrasive pads or cleaning
agents.

Common Cleaning Solutions

The cleaners and disinfectants listed below are recom-
mended for use on Datalogic Disinfectant-Ready Enclo-
sures:
PRODUCT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Hepacide Quat II
Alcohol Wipes
CaviWipes™
Virex® 256
Formula 409® Glass and
Surface Cleaner
26
POWERSCAN™ PM96XX
CHEMICAL CONTENT
Quaternary Ammonium Chloride
solution
Virucidal disinfectant cleaner
70% Isopropyl Alcohol
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl Ammonium
Chloride
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol