Vuly Lift Pro Assembly Manual page 14

Safety Padding
10
STEP
Place the Safety Padding onto the Mat and Safety Net. Unfold
and position it to cover the Springs. Ensure that all openings in
the Safety Padding are over the Net Pole holes in the Joiner
Poles and that the Vuly logo lines up with the entrance.
11
STEP
A. Lift up the Safety Padding, and completely remove the
Spring to the left of a Joiner Pole. Feed the Spring through
the loop on the Safety Padding, before re-hooking it to the
Mat and Frame.
B. Repeat for each Spring and loop in the Safety Padding to
the left of every Joiner Pole.
Remember: Ensure that the Safety Padding is correctly attached
and secured. Properly installed Safety Padding is crucial to
protect against injuries.
Net poles
12
STEP
A. Insert each Upper Net Pole into each
Lower Net Pole. The Lower Net Pole is
reinforced at the bottom.
B. Rest the completed Net Poles against
the frame at each Joiner Pole.
14
A
B