Vuly Lift Pro Assembly Manual page 11

Frame
1
STEP
M, L AND XL MODELS ONLY
A. Connect each Lower Frame Tube A to
a Lower Frame Tube B. Lower Frame
Tubes are those without spring holes
or square ends.
B. Connect each Upper Frame Tube A
to an Upper Frame Tube B. Ensure
that the push buttons lock these
components together.
2
STEP
A. Lay out each Lower Frame Tube in a circle. Place the Upper
Frame Tubes around them. Ensure that all push buttons are
on the left-hand side of their middle connection and that all
ends face the same direction.
Note: If all push buttons are not on the left half of the
connected Upper Frame Tubes and the ends of the Lower
Frame Tubes do not face the same direction, the Frame and
Springs will not attach correctly.
B. Position each Joiner Pole in the gaps around
the Frame Tubes.
Note: The feet of the Joiner Poles must face
outwards and the joiner connector inwards.
3
STEP
A. Choose a Joiner Pole. Slide Lower Frame
Tubes into both sides of it and an Upper
Frame Tube on the left side only.
B. Go around your trampoline, connecting the Upper and
Lower Frame Tubes to each Joiner Pole until you complete
the frame. Ensure that all push buttons properly lock.
C. See that your completed frame matches the image.
A
B
B
A
C
11