Settings; Measurement Settings (Conductivity); Changing The Settings For Conductivity Measurements - wtw Cond 7110 Operating Manual

Settings

6 Settings
List of settings for conductivity measurements
24
The meter has separate setting routines for the measurement settings and
system settings.
6.1

Measurement settings (conductivity)

6.1.1

Changing the settings for conductivity measurements

1. Open the setting menu in the measured value display with <M__>.
The first setting is displayed.
2. If necessary, indicate the required setting with <ENTER>.
3. To change the current setting, press <><>.
4. Confirm the setting with <ENTER>.
The setting is stored.
The next setting is displayed.
5. Change or confirm the other settings.
When the last setting is confirmed, the setting menu is auto-
matically quit.
or
Quit the setting menu with <M>.
Default settings are printed in bold.
The settings appear in the following order:
Displayed
(Confirm with
<ENTER>)
t25 /t20
Uni
Int.C
Possible setting
(Change with
<><>)
Reference temperature
TRef25
Tref20
Temperature unit
°C
°F
1 ... 180... 999 d
Description
Cleaning interval
ba75927e03
Cond 7110
04/2012