Basic Setups; Using The Audio 8 Dj As System’s Standard Audio Device; Using The Audio 8 Dj In Windows; Using The Audio 8 Dj In Mac Os X - Native Instruments Audio 8 DJ Operation Manual

8. Basic Setups

This chapter describes the most common possible setups and use cases.
8.1 Using the AUDIO 8 DJ as system's standard audio device
Using the AUDIO 8 DJ as standard sound card of your operating system will bring brilliance
in your living room when listening to music or watching DVDs via your computer.

8.1.1 Using the AUDIO 8 DJ in Windows

►
Open Start > Control Panel > Sounds & Audio Devices.
►
Click on the Audio tab.
►
As Default Device for Sound Playback, choose one of the available channel pairs of
the AUDIO 8 DJ, e.g. AUDIO 8 DJ (CH. D, Out 7|8).
►
Make sure the volume controls of the amplifier are completely turned down!
►
Plug a RCA cable into o
of your amplifier.
►
Open an available music file or sound of your computer. It should get played back via
the AUDIO 8 DJ now.

8.2.1 Using the AUDIO 8 DJ in Mac OS X

►
Click on A /u
pplicAtioNs tilities
Dock.
►
In "Audio Devices", choose "Audio 8 DJ" as Default Output.
►
Click on c s
oNfigure peAkers
►
Choose Stream 4 (Channel 7 & 8) as output.
5|6 of the AUDIO 8 DJ and connect it to a free input pair
ut
/A miDi s or open the Audio MIDI Setup from the
uDio etup
.
AUDIO 8 DJ – 30