Info Window; Selection Window; Input Mode Selector; Ni Logo - Native Instruments Audio 8 DJ Operation Manual

NI Logo

Click on the NI logo to open the A
sion number, the firmware version number, the settings tool version number as well as
the credits.
In case of a support inquiry you may be asked for one or more of these details.
Click on the A s to close it.
Bout creeN

7.1.3 Info Window

The i w displays helpful information about the different settings and features.
Nfo iNDow
Hover over one of the features and you will see a description of the respective setting or
feature.

7.1.4 Selection Window

In the s w , you can choose between the different options of the respective
electioN iNDow
settings and features. These reflect the options chosen on the AUDIO 8 DJ hardware and
can be changed from within the Settings Tool as well as on the AUDIO 8 DJ.

Input Mode Selector

The Input Mode Selector lets you adapt input channel A and B to different signal sources
(see below). If p i
hoNo Nput
i g s . Depending on what kind of signal source you want to use, choose one
Nput AiN elector
of the following options:
►
t V : Choose this if you use a digital vinyl system with control vinyls, because
imecoDe iNyl
this mode is optimized for best sound at the mixer.
►
t cD/ l : Choose this if you use a digital vinyl system with control CDs.
imecoDe iNe
►
p : Use this if you want to record normal vinyl records, because this mode is op-
hoNo
timized for best sound at the AUDIO 8 DJ.
s . The A
Bout creeN Bout
m is selected, you can adjust input gain using the p
oDe
s displays the driver ver-
creeN
hoNo
AUDIO 8 DJ – 26