Bosch CCS 1000 D Operation Manual page 28

28 en | Configuration
6.
Figure 7.3: Discussion Device base view
2014.09 | V1.0 |
When the Discussion Device is powered on the first time, it has no address and
association with the Control Unit. To initialize/address the Discussion Devices:
– Push the concealed initialization button (1) at the base of the Discussion Device. The
LED indicators of the Discussion Device are lit. The initialization button (1) is used
for reassigning/removing the address of Discussion Device.
– Push the microphone button (2 or 4) once. When initialized/addressed correctly, all
Discussion Device LEDs are off. When not initialized/addressed, try again or see
System settings, page 34 > Seats of the web browser.
– Note: Do not initialize/address more than one Discussion Device at the same time.
0 1
6 1
6 2
Operation manual
Digital Discussion System
Bosch Security Systems B.V.